Empty Cart
PVC Accessories
PVC fittings are essential components in the pipework of our installation. At Outlet Pool, we have a wide variety of fittings to offer. All of them provide maximum durability and the best performance, including the AENOR quality mark. In our comprehensive catalogue of PVC fittings, you will find everything necessary to maintain or repair your pressurised water system. Below, you will find all the indispensable products to keep your pipe system in top condition.
-
O-ring for manifolds
desde 0.13€
-
Retaining Ring
0.14€ -
PVC Coupling Sleeve
desde 0.25€
-
PVC Cepex Reduction Sleeve
desde 0.30€
-
Cepex PVC Plug
desde 0.32€
-
90° PVC Elbow Cepex
desde 0.37€
-
(1)Female PVC Threaded Nut
(1)desde 0.41€
-
Mixed Nut Coupling Sleeve PVC
desde 0.42€
-
90° PVC Cepex Tee
desde 0.44€
-
Male threaded PVC plug
desde 0.44€
-
Smooth PVC PE connection spike
desde 0.45€
-
Cepex PVC Union Sleeve
desde 0.45€
-
Flat EVA Gasket
desde 0.47€
-
Cepex Mixed PVC Male Connector
desde 0.53€
-
45° PVC Elbow Cepex
desde 0.54€
-
PVC Nut Link Sleeve
desde 0.56€
-
PVC Conical Reduction
desde 0.60€
-
Cepex PVC Terminal
desde 0.61€
-
90º Reduced PVC Tee
desde 0.61€
-
Double Threaded PVC Nipple
desde 0.63€
-
PVC Male Threaded Coupling Sleeve
desde 0.66€
-
PVC Male to Male Threaded Reducer
desde 0.68€
-
Short threaded PVC male x female reducer
desde 0.73€
-
Double Threaded PVC Union Sleeve
desde 0.75€
-
PVC Screw Cap
desde 0.75€
-
90º PVC Elbow Joint
desde 0.81€
-
Mixed PVC Union Sleeve
desde 0.82€
-
Screw, Nut, and Washers for Flanges
desde 0.86€
-
PVC Flange Sleeve
desde 0.86€
-
PVC Male Glue-On Coupling Sleeve
desde 0.87€
-
Mixed PVC Adapter
desde 0.88€
-
PVC Male to Female Threaded Reducer
desde 0.91€
-
90º Reduced PVC Te Mixta
desde 0.92€
-
90º PVC Threaded Elbow
desde 0.94€
-
PVC Gluing Cross
desde 0.99€
-
45º PVC Elbow Joint
desde 1.02€
-
90º PVC Elbow Tee
desde 1.03€
-
Reduced Spigot for PVC Collectors
1.12€ -
Double threaded nipple for PVC collectors
1.13€ -
45º Threaded Elbow PVC
desde 1.15€
-
90º PVC Gluing Curve
desde 1.29€
-
Reinforced 90º PVC Mixed Elbow
desde 1.31€
-
Spigot connection to PE male threaded PVC
desde 1.34€
-
Reinforced PVC Mixed Union Sleeve
desde 1.35€
-
90º Threaded PVC Tee
desde 1.47€
-
3-Piece PVC Link
desde 1.49€
-
45º Reinforced PVC Elbow Joint
desde 1.51€
-
90º Reinforced PVC Elbow Tee
desde 1.51€
-
3-Piece Mixed Link PVC Female Threaded and Solvent Weld
desde 1.71€
-
45º PVC Tee
desde 1.90€
-
3-Piece PVC Female Threaded Connector
desde 1.95€
-
90º PVC Reduction Elbow
desde 1.95€
What are PVC fittings used for?
These fittings are designed for fluid conduction frameworks. We can use them to create joints, branches, or terminations in our PVC pipe network. They can be used with both rigid and flexible PVC pipes. They come in different versions, including glued, threaded, or mixed types. In short, they are an essential complement to the piping system of our pool.
What is each of these PVC fittings used for?
As we have seen, we offer a wide variety of fittings. However, we need to know what each one is used for to determine exactly if it is the one we need in our case.
Elbow
It is used to change the direction of our PVC pipes. We install it between two lengths of pipe to modify the pipe's direction.
Sleeve
A reducing sleeve acts as an adhesive reducing cap. Mainly, it allows us to change the pipe diameter, enabling the connection of one PVC pipe to another or to any other fitting that does not match in diameter.
90º Tee
With this PVC fitting, we can branch pipes. It is a perfect complement to complete our PVC pipe system.
Cap
Caps can complete terminations, perform shutdowns, or simply end pipes.
Coupling
With a coupling, we can connect different pipe sections. They are an essential PVC fitting.
Nipple
With a nipple, we adapt PVC pipes to threaded connections. Its function is based on joining by gluing and threading the male end.
Terminal
This PVC fitting allows the pipe to adapt to the threaded connection.
Union
It allows the creation of movable joints between pipe sections. These are PVC glued joints.
Collector
These fittings are used for valves in pool filtration circuits. Their main feature is that they facilitate the installation of the ball valve.
What common characteristics do these PVC fittings have?
All our products provide maximum reliability. Specifically, these PVC fittings share technical specifications that guarantee their quality.
1 They ensure water flow.
2 Impact resistant.
3 They withstand liquid pressure.
4 Chemical resistant.
5 Long-lasting durability.
6 Corrosion resistant.
7 They withstand high pressures.
8 Suitable for drinking water and superior mechanical specifications.
9 AENOR quality mark.